新消息

认证

国际环境管理认证

NSF-ISR证明BCI Burke公司,LLC符合国际环境管理标准ISO 14001:2015和ISO 9001:2015。

ISO 9001:2015强调流程援助质量和客户服务的持续改进。ISO 14001:2015确保伯克在制造过程中遵循严格的环境控制。

有关更多信息,请访问http://www.nsf.org

IPEMA认证

BCI Burke公司,LLC,是良好IPEMA,国际游乐设备制造商协会的成员。IPEMA是一名成员驱动的国际贸易组织,代表并促进了游戏设备和浮面制造商的开放式市场。

In the interest of playground safety, the International Play Equipment Manufacturers Association (IPEMA) provides a Third Party Certification Service whereby a designated independent laboratory, TÜV SÜD America Inc., (TÜV), validates an equipment manufacturer’s certification of conformance to the ASTM F1487 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use, except sections 7.1.1, 10, 13.1.1, 13.1.2, 13.2, and 13.3; to CAN/CSA Z614 Children’s Playspaces and Equipment, except clauses 10 and 11; or both. A list of current validated products may be viewed atwww.ipema.org.

查看IPEMA网站。www.ipema.org.确认产品验证。

In the Interest of playground safety, the International Play Equipment Manufacturers Association (IPEMA) provides a Third Party Certification program whereby a designated independent laboratory, TÜV SÜD America Inc., (TÜV), validates a surfacing manufacturer’s certification of conformance to ASTM F1292, Standard Specification for Impact Attenuation Under and Around Playground Equipment Performance Criterion, Section 4.2; ASTM F1292, Standard Specification for Impact Attenuation Under and Around Playground Equipment Performance Criterion (in its entirety); ASTM F3351, Standard Test Method for Impact Testing In Laboratory at Specified Test Height; and for an engineered wood fiber manufacturer its certification of conformance, also to ASTM F2075, Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment; and for a Loose Fill Rubber manufacturer its certification of conformance, also to ASTM F3012, Standard Specification for Loose Fill Rubber for Use as a Playground Safety Surface under and around Playground Equipment. A list of current validated products, their thickness and critical height may be viewed atwww.ipema.org.

查看IPEMA网站。www.ipema.org.确认产品验证。

本网站所示的空间要求显示为ASTM标准。对其他标准的要求可能不同。

TUV认证和欧洲标准,EN 1176

TUV认证标志表明强度的产品和生产过程已经经过第三方验证者的测试和认证。TUV美国产品服务已经完成了所有必要的德国和欧盟认证要求,并获得了颁发认证标志和证书的授权。Intensity产品和Burke生产设备已经通过了全面的测试程序,并定期由TUV监控,以确保符合EN 1176,欧洲操场设备标准。